Crankshaft Sprocket Gear Second Gear Synchro Manual Transmission Reverse Gear 43 Teeth

02T311261Q Crankshaft Timing Sprocket Chain Gear Transmission 2nd Gear 43-Teeth For VW Jetta

Quick Detail of 2nd Gear:

Product Name: Crankshaft Timing Sprocket Chain 2 nd Gear

OE Number: 02T311261Q

Type: auto speed gear

Assemble position: Transmission

Car Model: VW Jetta

Tooth number: 43

Warranty:3 months

Key Word: Transmission 2nd Gear

Description of Transmission 2 nd Gear :

The Transmission 2nd gear can be used for up and down slopes. The advantage of this gear range is that when tilted up or down, the vehicle will maintain a stable position in first or second gear, without causing the transmission to continuously shift due to the load on the tilted up or the imbalance of the vehicle speed. When falling on a slope, using the resistance of the low engine speed to brake will not make the car go faster and faster.

Specification of Transmission 2 nd Gear :

Notices:

1. Open the packaging, check the products carefully, and take them gently.

2.Pay attention to the installation position.

3. Stop the car on a smooth ground, pull the handbrake, and hang it in neutral.

4. Open the hood of the vehicle and locate the transmission lever and connecting rod above the transmission box.

5. Remove the original gear teeth. Generally, you need to use a wrench or other tools to gently loosen the screws and remove the original gear teeth.

6. Clean the spare material and dust on the surface of the transmission to ensure that the newly assembled gear can work correctly.

7. Install the new gear, gently put the new gear into the corresponding position, and use screws to fix it.

8. After the installation is complete, you can carry out the stall test and hang it into each stall to see if there is any abnormality.

9. Finally, close the hood, restart the vehicle for test drive, and confirm that the gear is smooth, without abnormal vibration and abnormal sound.

FAQ

Q1. Can I have a sample order for gear?

A:Yes, we welcome sample order to test and check quality

Q2. How to proceed an order for gear?

A2. Firstly let us know your requirements or application.

Secondly we quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly we arrange the production

Q3. WHEN WILL MAKE DELIVERY?

A3.:Delivery Time Sample Order:1-3 days after receipt of the full payment.

Stock Order:3-7days after receipt of the full payment.

Q4. After-sales service?

A4:3 months warranty.If you find any defective accessories first time. Send us the pictures or video. As an experienced manufacturer, we will provide you with new parts free of charge for replacement in the next order. You can re guarantee the quality and after-sales service.

Q5: Will you provide a warranty?

A5: Yes, we are very confident in our products, and we pack them very well, so usually you will receive your order in good condition. But due to long time shipment there will be a little damage for products. Any quality issue, we will deal with it immediately.

Q6:How we can guarantee quality?

A6:Always a pre-production sample before mass production; Always final inspection before shipment